Workshop service for your existing steel-tip darts. Tiger machines suitable barrels so they can accept supported screw-in point systems instead of fixed points.

£25 per set
Current turnaround: 2-3 working days from receiving your darts to dispatching them back to you.

Compatibility and suitability

Target Swiss Point: supported.
Harrows Quick Point: supported.
Winmau: current and newer barrels may be suitable. Some older or first-edition barrels can require a separate adaption route.
Winmau Switch: use our Screw Point Adaption service.

The service is for suitable steel-tip darts. It is most commonly used on tungsten barrels, but suitable brass steel-tip barrels can also be converted. Soft-tip darts are not covered by this service.

Barrel design, dimensions, damage, wear or previous modification can affect suitability. If you are unsure about a particular set, contact us before sending your darts.

What is included

Removal of normal intact fixed points where needed for preparation.
Drilling and threading the point end of suitable barrels for the supported screw-in system.
Workshop inspection when the darts arrive before the modification is carried out.

New screw-in points are not included. You can add suitable points from our dart points range to the same order.

If a point is broken and lodged inside a barrel, you will also need Broken Dart Point Removal for each affected barrel. That work is separate from normal fixed-point removal.

How ordering and sending works

Order Screw Point Conversion for the set you want us to modify.
Your order confirmation will contain the current instructions for sending your barrels to Tiger.
Package the barrels securely. If intact points are still fitted, protect them with a point protector or suitable wrapping.
Once received, Tiger checks the darts, carries out the workshop work and returns them through the normal fulfilment process.

You do not need to remove intact fixed points yourself if you do not have the correct repointing tool.

Weight loss

Drilling and threading removes a small amount of material, so the barrel weight will reduce. The exact change depends on the barrel and the work required. Tiger's current published guide is:

Brand	Maximum weight loss
Bulls	0.2g
Cosmo	0.3g
Cuesoul	0.3g
Harrows	0.3g
Loxley	0.4g
Mission	0.3g
One80	0.4g
Red Dragon	0.5g
Shot	0.3g
Superdarts	0.3g
Target	0.2g
Trinidad	0.4g
Unicorn	0.2g
Winmau	0.5g
Custom barrels	Varies, up to 0.5g

Important before ordering

This is a physical, non-reversible modification.
The modification may invalidate the original manufacturer's warranty.
Final suitability can depend on the physical condition and construction of the darts when inspected.

Aftercare

Metal-on-metal threads can loosen with use. Tighten the point when needed, but do not over-tighten it as this can damage the thread, point or fitting tool.

Screw Point Conversion